Mlily Premier 3000 Review
The top of Mlily's main range, and the model where the numbering stops being the useful guide it was lower down.
I earn a commission if you buy through some links on this page. It never changes what I recommend, and I publish negative verdicts on brands I earn from. Editorial independence.
Verdict
The top of Mlily's main range, and the model where the numbering stops being the useful guide it was lower down. Mlily publishes 3,000 M-springs here, double decked in a 16 centimetre unit. Past about 2,000 pocket springs, what determines how a mattress feels is the comfort layer above them, and the model number tells you nothing about that.
Buy it if
You want a high spring count with fine contouring, and you have compared the comfort layers rather than the numbers.
Avoid it if
You want maximum support. Fewer, stronger springs serve a heavier sleeper better than more, thinner ones.
Where the Premier 3000 is sold
Mlily publishes the specification and no price, and keeps no basket. The 3000 comes from a retailer in its store finder or from a seller on Amazon UK.
Nothing applies automatically, because the brand's site is a catalogue and not a shop. Opens in a new tab. Past 2,000 springs the comfort layer is what varies, so make the retailer describe it.
Mlily on Amazon UK
Amazon UK lists the 3000, usually with less layer detail than the brand gives.
No code needed. Prices on Amazon change frequently, so check the seller and the returns terms before you buy. Opening in a new tab.
| Specification | Detail |
|---|---|
| Type | Pocket sprung |
| Springs | 3,000 M-springs, double decked, in a 16 centimetre unit |
| Ortho variant | Available at the same count, but on a 14 centimetre spring unit rather than 16 |
| Position | Top of the Premier collection |
| What the number stops telling you | How the mattress feels, which is set by the comfort layer |
The scores
A well specified mattress where the headline number has stopped being the useful measure.
Competitive. The step from 2,000 is smaller in practice than in the numbers.
Fine contouring. Individual spring strength is lower than at 2,000.
A dense spring layer moves air well.
Not specifically reinforced.
Three thousand pocketed springs damp movement well.
Varies by seller. Check before ordering.
What 3,000 is made of here
Three thousand springs, stacked rather than spread
Mlily publishes the Premier 3000 as 3,000 M-springs, double decked, in a 16 centimetre unit. No mini springs are added in to reach the number, so unlike the Deluxe 3000 this really is three thousand pocket springs.
Double decked is the qualifier that changes how you should read it, and it is not applied consistently across the brand. Which models stack and which do not.
Double decking means two shorter springs sit one on top of the other inside the unit, so the count is reached partly by height rather than entirely by area. That matters because independence is a property of the grid across the surface, not of the total. A sleeper lying on a double decked 3,000 is supported by rather fewer than three thousand independent columns, and the second deck mostly changes the shape of the load curve rather than the resolution of the contouring.
What it does well is soften the initial response without softening the support, which is why high counts are paired with plush surfaces: there is enough resolution for small regions to move on their own, and enough travel for them to do it. The Premier 3000 sits at the top of its collection for exactly that reason, and it is the first model in the Premier line where the comfort layer, rather than the spring unit, decides how the mattress feels.
Which is where the number stops being useful. Mlily does not publish a comfort layer thickness or a foam density for this model, so two retailers' photographs are more informative than the 3000 on the label. Compare the depth of what sits above the springs, and if you cannot get that figure, compare the total mattress height against the Premier 2000 and ask what the extra centimetres are made of.
The 3,000 is also not quoted per size anywhere on Mlily's site, so it describes the model and not your king. Cover is the same five years of defects protection that applies across the UK range, which I have put beside every other brand's in the guarantee comparison.
Where the numbers stop helping
The relationship between spring count and quality flattens well before the numbers stop climbing, and it is worth understanding the mechanism.
What more springs genuinely gives you. Each one answers for a smaller patch of you, so the surface can follow the step from waist to hip rather than averaging across it. The same arithmetic improves motion isolation, because a movement on one side of the bed is taken up by the springs immediately under it and has fewer neighbours to pass it on to.
What it does not give you. More support. A spring supports according to its gauge and its height, not according to how many neighbours it has. To fit 3,000 springs into a king, each must be smaller and made from thinner wire than the 2,000 in a Premier 2000. You are trading individual strength for collective density.
Where the trade is worth it. On a plush surface, where you sink and need fine independent response. On a firm one, where you barely compress the surface, it does considerably less.
Compare the comfort layers, not the numbers
Beyond roughly two thousand springs the spring unit stops being the variable, and the comfort layer above it decides everything you will notice.
That is where the meaningful difference between a Premier 2000 and a Premier 3000 will be, and it is the part the numbering tells you nothing about. Compare the comfort layer depth, the material and the stated firmness before letting the headline figure decide.
A well made 2,000 with a good comfort layer beats a poorly made 3,000 every time.
A correction worth making
Commonly repeated, and wrong
Higher spring counts are treated as straightforwardly better, and beyond roughly 2,000 pocket springs manufacturers increase the count by using thinner gauge wire in smaller units, or by adding a second shallower spring layer and quoting the total. That changes the character of the support rather than increasing it: finer contouring and better motion isolation, at the cost of individual spring strength. High counts suit plush mattresses and add much less on firm ones.
Should you buy it?
Yes if you want fine contouring and good motion isolation, and you have compared the comfort layers across the range.
If support is what you want, the Premier 2000 with fewer, stronger springs is the better mattress and costs less.
Where this sits
Other pages on this site that bear on the same decision.
- Mlily Deluxe 2000 Review
- Mlily Deluxe 3000 Review
- Mlily Deluxe 4000 Review
- Mattress Reviews
- Best mattress UK
Questions people ask
Is 3000 springs better than 2000?
Not straightforwardly. To fit more springs into a king, each must be smaller and thinner-gauged. You gain finer contouring and motion isolation and lose individual spring strength. That suits plush mattresses and adds much less on firm ones.
What should I compare past 2000 springs?
The comfort layer above them, which is what determines how the mattress feels at that point. Compare depth, material and stated firmness, because the model number tells you nothing about any of it.